I-WAFER-BT-i1

3.5” SBC with Intel® 22nm Atom™/Celeron® on-board SoC, VGA/LVDS/iDP, Dual PCIe GbE, USB 3.0, PCIe Mini, SATA 3Gb/s, mSATA

Features

  • 3.5” SBC supports Intel® 22nm Atom™ 1.5GHz on-board SoC
  • Dual independent display support
  • 1333/1066 MHz 1.35V DDR3L SDRAM supported up to 8GB
  • COM, USB 3.0, SATA 3Gb/s, PCIe Mini, mSATA and Audio support

Specification

Anewtech-I-WAFER-BT-i1
CPUIntel® Atom™ E3845 on-board SoC (1.91GHz, quad-core, 2MB cache, TDP=10W)
Intel® Atom™ E3827 on-board SoC (1.75GHz, dual-core, 1MB cache, TDP=8W)
Intel® Atom™ E3826 on-board SoC (1.46GHz, dual-core, 1MB cache, TDP=7W)
Intel® Atom™ E3825 on-board SoC (1.33GHz, dual-core, 1MB cache, TDP=6W)
Intel® Atom™ E3815 on-board SoC (1.46GHz, single-core, 512KB cache, TDP=5W)
Intel® Celeron® J1900 on-board SoC (2GHz, quad-core, 2MB cache, TDP=10W)
Intel® Celeron® N2930 on-board SoC (1.83GHz, quad-core, 2MB cache, TDP=7.5W)
Intel® Celeron® N2807 on-board SoC (1.58GHz, dual-core, 2MB cache, TDP=4.3W)
BIOSAMI UEFI BIOS
System MemoryOne 204-pin 1066/1333 MHz single-channel DDR3L SO-DIMM supports up to 8GB (J1900, N2930, E3845, E3827, E3826) or 4GB (N2807, E3825, E3815)
EthernetLAN1: Intel® I210-AT PCIe controller with NCSI support
LAN2: Intel® I211-AT PCIe controller
I/O Interface1 x PS/2 KB/MS
2 x SATA 3Gb/s with 5V SATA power connector (no RAID)
1 x USB 3.0 (on rear I/O)
5 x USB 2.0 (1 on rear I/O, 4 by pin header)
1 x RS-422/485 (by pin header)
3 x RS-232 (1 on rear I/O, 2 by pin header)
Digital I/O8-bit digital I/O (4-bit input, 4-bit output)
Super I/OFintek F81866
SMBus1 x 4-pin (1x4) wafer
AudioRealtek ALC662 HD codec
1 x Analog audio by 10-pin (2x5) header
Display InterfacesDual Independent Display
1 x VGA (Resolution: 1600x1200@60Hz)
1 x 24-bit dual-channel LVDS connector (1920x1200@60Hz)
1 x iDP interface for HDMI, LVDS, VGA, DVI, DP (up to 3840x2160@60 Hz)
Expansion1 x Full-size PCIe Mini card slot with mSATA support (SATA2 and mSATA share SATA signal)
Watchdog TimerSoftware programmable, supports 1~255 sec. system reset
Power Supply12V DC input only (AT/ATX support)
Power Consumption+12V@1.45A (Intel® Celeron® J1900 CPU, 1 x 8GB 1333 MHz DDR3 memory)
GraphicIntel® HD Graphics Gen 7 Engines with 4 execution unit, supports DX11.1, OpenGL 4.2 and OpenCL1.2
Operating Temperature-20°C ~ 60°C
Storage Temperature-30°C ~ 70°C
Humidity5% ~ 95%, non-condensing
Dimensions146mm x 102mm
WeightGW:600g / NW:250g
Embedded ControllerITE IT8528E
Front Panel1 x 6-pin wafer for power LED & HDD LED
1 x 2-pin wafer for power button
1 x 2-pin wafer for power reset
Fan Connector1 x 4-pin CPU fan connector
1 x 4-pin system fan connector
iRIS Remote Management Module1 x iRIS-1010 slot
LAN LED2 x 2-pin (1x2) header

Have Questions? Call +65 6292 0801 or email sales@anewtech.com.sg