Intelligent Stack Light Monitoring Sensor for OEE Application

WISE-S100 one-size-fits-all design can detect and indicate several simultaneous operational states through the use of light states such as light on, light off, slow blinking, and fast blinking. WISE-S100 has 8 sensors inside taking up over 90% of its height.

When WISE-4000 wireless modular I/O series is paired with the WISE-S100 sensor, users get a remote and intelligent OEE solution that can be integrated into machinery without stopping production or worrying about wiring. WISE-4000 supports WiFi 2.4G and various LPWAN wireless technologies such as LoRaWAN and proprietary LPWAN (SUB-G) which has higher penetration, lower interference, wider coverage, and fits diverse production scenarios on the production line. WISE-4000 LPWAN series comes with an optional battery power solution.


Anewtech-oee-towerlightOne Solution for Multiple Stack-Type Light Tower Applications

Single stack light status monitoring - no more individually manually checking equipment lights one by one. An operator can sit in front of the SCADA system and monitor the whole manufacturing status remotely or close by.

No need to stop machinery during installation - directly position WISE-S100 stack light tower on equipment in the best position. No need to stop machines/equipment and connection and cabling is simple and straight forward.

Remote Intelligent OEE Solution — Paired with the WISE-4000 Wireless I/O Module
WISE-S100 intelligent stack light becomes a complete OEE solution when paired with WISE-4000 wireless I/O module which supports WiFi, LoRaWAN, and proprietary LPWAN wireless technology for complex environment scenarios. LoRaWAN/Proprietary LPWAN can even support an optional battery solution to do away with tangled wires and cabling issues.

• Up to 10, 000 samples of local data storage with timestamps in WISE-4000 WiFi series.
• WISE-4000 series supports Modbus, HTTP, RESTful, MQTT messaging protocols and sends data to SCADA, MES, etc.


WISE-S100 pair with WISE-4051

  • Wi-Fi 2.4G Wireless data transmission
  • Modbus configuration for industrial application
  • 8DI and RS-485 I/O for data collection
  • MQTT, RESTful, HTTP, Modbus/TCP for factory monitoring system integration such as SCADA system

WISE-S100 pair with WISE-4220

  • Wi-Fi 2.4G Wireless data transmission
  • No need extra power source (With WISE-S235 extension board, it can directly power output for WISE-S100)
  • No extra Modbus configuration (The serial bus protocol allows users directly see the stack light data via WISE studio
  • Interchangeable I/O design (Paring with WISE-S250 with RS-485 and Modbus for WISE-S100 with 6DI, 2DO, and RS-485 I/O

One Solution for Multiple Stack Type Light Tower Applications


Stack Light Status Monitoring

WISE-S100 is capable of detecting light statuses—including on/off, and slow/fast blink. This solution has 8x built-in light sensors for quick installation to fulfill most tower light applications


Plug and Play

Directly position WISE-S100 on the stack-type light tower to quickly get light statuses. Users do not need to stop the machine/equipment to deploy this intelligent OEE solution.

Target Applications
WISE-S100 intelligent stack light and WISE-4000 wireless I/O module OEE solution are suitable for use in continuous flow production and discrete manufacturing industries. WISE-S100 is aimed at:

• Existing machines with the light towers that have no data transmission functions.
• Equipment with light towers have no direct connectivity within their environment.
• Aftermarket equipment that have light towers that are functioning but cannot be turned off or controlled