SYS-2028TP-DTR

2U Twin Server. Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v4†/ v3 family

Anewtech-twin-server-SYS-2028TP-DTR

Features

Two hot-pluggable systems (nodes) in a 2U form factor. Each node supports the following:

  • Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600  v4†/ v3 family; QPI up to 9.6GT/s
  • Up to 2TB† ECC 3DS LRDIMM , up to  DDR4- 2400†MHz ; 16x DIMM slots
  • 1x PCI-E 3.0 x16, 1x PCI-E 3.0 x8 slot, and 1x PCI-E 3.0 x16 for  GPU/Xeon Phi support (w/ GPU kit)
  • Intel® i350 Dual port GbE LAN
  • Integrated IPMI 2.0 with KVM and  Dedicated LAN
  • 8x 2.5" Hot-swap SATA HDD Bays
  • mSATA (full size) support
  • 1280W Redundant Power Supplies Platinum Level Digital (94%)

Specification

Anewtech-twin-server-SYS-2028TP-DTR

Product SKU
SYS-2028TP-DTR SuperServer 2028TP-DTR
Motherboard (Two per System) Super X10DRT-P
Processor/Cache (per Node)
CPU Intel® Xeon® processor E5-2600 v4/ v3 family (up to 145W TDP) *
Dual Socket R3 (LGA 2011)
Cores / Cache Up to 22 Cores / Up to 55MB Cache
System Bus QPI up to 9.6 GT/s
Note BIOS version 2.0 or above is required
Note * Please contact Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
System Memory (per Node)
Memory Capacity 16x 288-pin DDR4 DIMM slots
Up to 2TB ECC 3DS LRDIMM, 512GB ECC RDIMM
Memory Type 2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes RDIMM: 32GB, 16GB, 8GB, 4GB
LRDIMM: 64GB, 32GB
3DS LRDIMM: 128GB
Memory Voltage 1.2 V
Error Detection Corrects single-bit errors
On-Board Devices (per Node)
Chipset Intel® C612 chipset
SATA SATA3 (6Gbps); RAID 0, 1, 5, 10
IPMI Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2400 BMC
Network Controllers Intel® i350-AM2 Dual Port Gigabit Ethernet
Virtual Machine Device Queues reduce I/O overhead
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics ASPEED AST2400 BMC
Input / Output (per Node)
SATA 8x SATA3 (6Gbps) ports
LAN 2x RJ45 Gigabit Ethernet LAN ports
1x RJ45 Dedicated IPMI LAN port
USB 2x USB 3.0 ports total (2x rear)
VGA 1x VGA port
Serial Port / Header 1x Fast UART 16550 port / 1 Header (internal)
Others 1x mSATA (full size) and one SATADOM support on the daughter card
1x SATADOM support on the motherboard
Chassis
Form Factor 2U Rackmount
Model CSE-217HD+-R1K28B
Dimensions and Weight
Width 17.25" (438mm)
Height 3.47" (88mm)
Depth 28.5" (724mm)
Weight Gross Weight: 85 lbs (38.6kg)
Net Weight: 66 lbs (29.9 kg)
Available Colors Black
Front Panel
Buttons Power On/Off button
UID button
LEDs Power status LED
HDD activity LED
2x Network activity LEDs
Universal Information (UID) LED
Expansion Slots (per Node)
PCI-Express 1x PCI-E 3.0 x16 Low-profile slot
1x PCI-E 3.0 x8 slot
1x PCI-E 3.0 x16 for GPU/Xeon Phi support (w/ GPU kit)
(Both CPUs need to be installed for full access to PCI-E slots)
Drive Bays (per Node)
Hot-swap 8x 2.5" Hot-swap SATA HDD trays
System Cooling
Fans 4x 8cm heavy duty PWM fans with optimal fan speed control
Power Supply 1280W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2
AC Input 1000W Output @ 100-140V, 8-12A, 50-60Hz
1280W Output @ 180-240V, 6-8A, 50-60Hz
DC Output 1000W: +12V/83A; +5Vsb/4A
1280W: +12V/106.7A, +5Vsb/4A
Certification Platinum Certified
System BIOS
BIOS Type 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features Plug and Play (PnP)
APM 1.2
PCI 2.2
ACPI 1.0 / 2.0
USB Keyboard support
SMBIOS 2.3
UEFI
Operating Environment / Compliance
RoHS RoHS Compliant
Environmental Spec. Operating Temperature: 10°C to 35°C (50°F to 95°F)
Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5% to 95% (non-condensing)