T-TMS4705

Military Computer Chassis. MIL-STD-810G and MIL-STD-461F approved with eATX Motherboard

Anewtech-military-computer-Trenton-T-TMS4705

Features

  • TMS4705 is a 4U military computer chassis made for applications with a maximum 26″ depth requirement. Rugged yet lightweight, it tolerates a remarkable shock value of 40G with the use of MIL-DTL-38999 and MIL-STD-1553 rear I/O connectors.
  • TMS4705 rackmount computer chassis has four front-accessible 3.5" and one internal 3.5" drive bays and supports either dual Xeon or single Core series CPUs.
  • All internal cabling is customized and secured to the chassis to optimize airflow and system cooling. The US-made military grade computer chassis is built to survive and comes standard with anti-corrosion coating

Datasheet

Specification

Model TMS4705
Board Type Single or dual-processor uATX or EATX embedded motherboard
Description The TMS4705 is a 4U rackmount military computer with a configurable arrangement of  MIL-DTL-38999 and MIL-STD-1553 rear-chassis I/O connectors.  These sealed connectors plus front and rear-chassis air filters enable the TMS4705 to be tested and certified to a variety of MIL-STD-810G and MIL-STD-461F standards and test methods.  The TMS4705 offers a choice of a single or dual-processor embedded motherboard with PCI Express and PCI option card support.  Additional system options featured are four front access and two internal dual-drive bays, standard I/O connectors, and a choice of one AC or DC power supply.
Depth 26″/60mm
Agency Approvals & Compliance

The TMS4705 is similar in design to the TMS4702.  A basic TMS4702 product configuration has been tested and certified to the following MIL-STD-810G and MIL-STD-461F methods and procedures.

SHOCK & VIBRATION
Functional Shock — MIL-STD-810G, Tested to method 516.6, Procedure I, 20G, 11ms, 3 per axis
Vibration – MIL-STD-810G, Tested to method 514.6, Procedure I, Category 4, 10-500Hz, 1.04Grms vertical, 0.204Grms transverse, and 0.704 longitudinal axis, 60min. per axis, operating and non-operating.  Also included in test method 514.6 is vibration – operation – Procedure 1 Category 12 for Jet aircraft and Category 13 for Propeller aircraft.

TEMPERATURE
High-Temp Operating: Tested MIL-STD-810G, Method 501.5, Procedure II, 55° C for 2hrs. after temperature stabilization
Low-Temp Operation: Tested MIL-STD-810G, Method 502.5, Procedure II, temperature soak at -10° C for 2hrs. after temperature stabilization
High-Temp Storage: Tested MIL-STD-810G, Method 501.5, Procedure I, 71° C for 2hrs. after temperature stabilization
Low-Temp Storage: Tested MIL-STD-810G, Method 502.5, Procedure II, temperature soak at –51° C for 2hrs. after temperature stabilization

ALTITUDE
Operational: Tested to MIL-STD-810G, Method 500.5, Procedure II, 15,000′ (4,600m) for 1hr. after stabilization
Storage: Tested to MIL-STD-810G, Method 500.5, Procedure I, 15,000′ (4,600m) for 1hr. after stabilization

EMI/RFI EMISSIONS
MIL-STD-461F, Methods CE101, CE102, CS101, CS114, RE101, RE102, RS101, RS103, and R Additional certification testing for specific

Environmental Temperature: 0º C to 50º C (operating) and -40º C to 70ºC (storage)
Humidity: 5% to 90% non-condensing
Shock: 20G (operational)
Altitude: -1,000ft./304.8m to 15,000ft./4,5072m (operating) and -1,000ft./304.8m to 40,000ft./12,192m (non-operating)
Drive Bays 4 – Front access 3.5″ bays support 8 – 2.5″ front removable/hot swap HDD/SDDs (max)
1 – Internal bay supports up to 2 – 2.5″ front removable/hot swap HDD/SDDs (max)
1 – Slim-line optical media bay
Data Storage Capacity  Maximum storage capacity depends on the drive type and individual drive capacity selected

Eight available 2.5” front access drive carriers and two internally-mounted 2.5″ drives support 15mm thick 1TB or greater HDDs

4TB – 10TB* typical data storage capacity when using 2.5” HDDs and 2.4TB – 8.0TB* when using 2.5” SSDs
*Maximum capacity increases with larger capacity drives

Chassis Standard EIA RS-310C 19” Rackmount Standard
Construction Lightweight, rugged aluminum with corrosion-resistant coating
Color Black front panel (standard)
Version MIL-STD-810G, 4U, 19” rackmount chassis with a choice of a MicroATX (uATX) or ExtendedATX (EATX) long-life embedded motherboard and MIL-DTL-38999 and MIL-STD-1553 rear I/O chassis connectors
Power Supply One, 1U, 700W, 90 to 264VAC -OR- 18 to 36VDC P/S, internal fixed mount
Cooling 3 – 92mm Fans, 120CFM each with chassis temperature monitoring speed control via the motherboard
Indicators Front panel LEDs for HDD/SDD activity, Power and Cooling Fan Status
Switch Power On/Off and Reset
Hold Down Bar Robust hold down bar for the plug-in I/O cards provides added security in high vibration environments
Air Filter Front door option provides tool-less access to the system filter for easy cleaning and maintenance. An additional rear-chassis air filter comes standard on the TMS4703 and will prove useful in hostile application environments.
Metric Dimensions 48.26cm (W) x 17.78cm (H) x 66.04cm (D)
Dimensions 19.0″ (W) x 7.0” (H) x 26.0” (D)
Chassis Net Weight 35.8 Lbs. (13.62 Kg.) – includes chassis + dual-processor BXM7504 dual-processor motherboard + one 2.5″ HDD + DVD + one, fixed-mount AC power supply only
Final system weight is a function of the specific system configuration.