M350

Digital Console Clock. 4 or 6 digit internal digital display clocks operating from either serial time codes or NTP network time servers.

Anewtech-time-and-frequency-M350

Features

  • High-intensity LED digits
  • Excellent readability
  • TCXO based Real Time Holdover Clock
  • Suitable for interior applications
  • User configuration via web browser
  • Standard DIN IEC 61554 (DIN 43700)  dimensions
  • Fully CE & RoHS Compliant
  • Simple to configure for specific applications with a large range of options 

Datasheet

Specification

Options and ratings
Single/Double Side Single sided
No. of Digits 6
Digit Size (mm) [13x6] or [20x4+13x2] or [25x4+20x2] or [25x6]
Digit Type Seven Segment
Digit Colours Red or Yellow or Green
Input Signal NTP or RS422 / RS485 / RS232 Serial Timecodes
Power Power Over Ethernet (PoE) or Mains (90-264VAC 50/60Hz)
Front Acrylic
Application Indoor equipment panel consoles
Serial Interface RS232 or RS422 or RS485 Link configured - 9 Way D Socket
Network Interface RJ45 100BaseT - NTPv3 [RFC1305]
Case Finish Clear Chem Film per MIL-DTL-5541F Class 2 Type 2
Environmental Operating 0°C to +50°C 0-95% R.H. Non Condensing
TCXO Holdover 1st year 1ppm : 600µs in 24 hrs
Sync Indication Flashing display colons indicate holdover

The M350 LED Console Time Display is ideal in any control room environment or operations control centre where clear and precise time display is needed. The unit dimensions conform to standard DIN dimensions and are readily incorporated into any console design.

A comprehensive range of digit colours, digit sizes and data interfaces are available to suit operation with a variety of system equipment configurations and master clocks, compatible with 50 industry standard serial timecodes as well as NTP. All displays clocks are provided with a TCXO based real time clock which maintains an accurate time display during periods of holdover should there be a loss of synchronised master clock time.

Each console clock has a two button menu interface allowing display brightness adjustment as well as menu access and configuration for UTC or local time setting preferences. In addition, all units have a built in web based configuration server allowing full access to the menu configurations and IP address, subnet & gateway settings, thereby facilitating additional monitoring and remote setup capability. All units are built to ISO9100D aerospace quality standards and are designed and supplied as long life, highly durable display units, specifically for use in high integrity and high reliability applications.

Typical applications:

  • Rail - Network Control Rooms
  • Airports - Air Traffic Control Rooms
  • Defence & Aerospace - Mission Control Security Control e.g. Police HQs, universities, hospitals, etc