Digi XBee Gateway
Programmable Digi XBee to IP Gateway with Scalable Device Management
- Secure WAN connectivity for large networks of Digi XBee-based devices
- Open Source Python environment for custom application development on the gateway
- Flexible Cellular, Wi-Fi and Ethernet WAN connectivity options
- Integration with Digi Remote Manager enables remote configuration and management of complete XBee network
| Item | Digi XBee Gateway | Digi XBee Cellular Gateway |
|---|---|---|
| General | ||
| Management | Secure enterprise management via Digi Remote Manager | |
| Protocols | UDP/TCP, DHCP | |
| LEDs | Power, Network (LAN/WAN), Zigbee (HAN/PAN) | Power, Network (LAN/WAN), Zigbee (HAN/PAN), Cellular signal strength |
| Security | SSL tunnels, WEP-40, WEP-104, WPA/WPA2, Authentication with PSK and EAP | SSL tunnels, Cellular network security |
| Zigbee | XBee® ZB SMT transmit power 6.3 mW (+8 dBm); Receiver sensitivity (1% PER) -102 dBm | |
| Dimensions (L x W x H) | 3 in x 3 in x 1 in (7.62 cm x 7.62 cm x 2.54 cm) | 3 in x 4 in x 1 in (7.62 cm x 10.16 cm x 2.54 cm) |
| Development | ||
| Python Version | 2.7.1 | |
| Operating System | Digi Embedded Linux | |
| XBee Gateway Application | XBee data sent to the gateway is automatically available to online applications via Digi Remote Manager | |
| Processor and Memory (Varies by firmware and OS version) | Freescale i.MX28, 20 MB RAM, 10 MB file space | |
| Zigbee | ||
| Zigbee Stack | Zigbee PRO Feature Set, Ember EM357 | |
| Zigbee Module | Digi XBee® ZB SMT (S2C) | |
| Transmit Power/Receive Sensitivity | Worldwide version: XBee ZB SMT transmit power 6.3 mW (+8 dBm); Receiver sensitivity (1% PER) -102 dBm; North American version: XBee-PRO® ZB SMT transmit power: 63 mW (+18 dBm); Receiver sensitivity (1% PER) -102 dBmP | |
| Wi-Fi | ||
| 802.11 | b/g/n | N/A |
| Data Rate | Up to 72.2 Mbps | N/A |
| Transmit Power | 18 dBm typical (varies by mode, channel and region) | N/A |
| Receiver Sensitivity | Up to -87 dBm @ 11 Mbps | N/A |
| Modes | AP Client Modes only; Access Point Mode not supported | N/A |
| Ethernet | ||
| Ports | 1 RJ-45 port | |
| Physical Layer | 10/100Base-T | |
| Routing | Ethernet port designed for configuration and WAN backhaul | |
| Power Requirements | ||
| Power Supply | 5 VDC power supply with barrel connector included | |
| Power Consumption | Typical: 1.2 W, Max: 2.5 W | Typical: 3.5 W, Max: 15 W |
| Environmental | ||
| Operating Temperature | 0° C to 40° C (32° F to 104° F) | |
| Relative Humidity | 5% to 95% (non-condensing) | |
| Regulatory Approvals | ||
| Mobile Certifications (GSM) | N/A | AT&T |
| Mobile Certifications (CDMA) | N/A | Verizon / Sprint |
| Safety | UL 60950-1, CSA C22.2 and EN 60950-1 | |
| Emissions/Immunity/Transmitter | CE, FCC Part 15 (Class B), IC, ETSI | |
Digi XBee Gateway provides a low-cost, programmable solution to connect networks of Digi XBee-enabled devices to IP networks. Including serving as a Zigbee to WiFi or Zigbee to cellular bridge. With a simple, open-source Python development environment, this gateway enables custom applications to run locally while interfacing across existing Ethernet/Wi-Fi/cellular networks for WAN connectivity to cloud-based software applications.
Digi XBee Gateway products can be managed remotely via Digi Remote Manager. Digi Remote Manager allows users to remotely manage thousands of deployed devices, supporting features like remote firmware upgrades and event alarms.
Digi XBee Gateway can be tested and developed using the Digi XBee Zigbee Cloud Kit, which fully integrates the Digi XBee Gateway, Digi XBee Module, Digi Remote Manager and a sample web application into a cohesive internet-connected solution. This kit is a powerful tool that enables developers to create internet-connected prototypes in 30 minutes or less.