O-IES-2042FX
Industrial 6-port lite-managed Ethernet switch. 4x10/100Base-T(X) and 2x100Base-FX ports
- Fastest Redundant Ethernet Ring: O-Ring (recovery time < 10ms over 250 units of connection)
- Open-Ring supports other vendor’s ring technology in open architecture
- O-Chain support the multiple redundant ring technology
- Multiple Redundant Ethernet technology RSTP/STP, O-Ring supported to protect your industrial network
- Provides Fast recovery technology for Ethernet multi-redundancy
- SNMP v1/v2c/v3 ,http server, telnet server support
- Two 100Base-FX fiber ports support for long distance connection
- Rigid IP-30 housing design
- DIN-Rail and wall mounting enabled
Datasheet
Product Specification
| Model | IES-2042FX-MM-SC | IES-2042FX-SS-SC |
| Physical Ports | ||
| 10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX | 4 | |
| Fiber Ports Number | 2 | 2 |
| Fiber Ports Standard | 100Base-FX | 100Base-FX |
| Fiber Mode | Multi-mode | Single-mode |
| Fiber Diameter (μm) | 62.5/125 μm 50/125 μm | 9/125 μm |
| Fiber Optical Connector | SC | SC |
| Typical Distance (km) | 2 km | 30 km |
| Wavelength (nm) | 1310 nm | 1310 nm |
| Max. Output Optical Power (dBm) | -14 dBm | -8 dBm |
| Min. Output Optical Power (dBm) | -23.5 dBm | -15 dBm |
| Max. Input Optical Power (Saturation) | 0 dBm | 0 dBm |
| Min. Input Optical Power (Sensitivity) | -31 dBm | -34 dBm |
| Link Budget (dB) | 7.5 dB | 19 dB |
| Technology | ||
| Ethernet Standards | IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX and 100Base-FX IEEE 802.3x for Flow control IEEE 802.1D for STP (Spanning Tree Protocol) IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol) IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)v1.41 / Dec, 2011 | |
| MAC Table | 1024 MAC addresses | |
| Priority Queues | 4 | |
| Processing | Store-and-Forward | |
| Switch Properties | Switching bandwidth : 1.2Gbps VLAN : Port Based | |
| Security Featues | Enable/disable ports VLAN to segregate and secure network traffic | |
| Software Features | STP/RSTP (IEEE 802.1D/w) Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units DHCP Client Port base VLAN LLDP (Link Layer Discovery Protocol) Port configuration, status, statistics, monitoring, security SNMP v1/v2c/v3 and private MIB support | |
| Network Redundancy | O-Ring Open-Ring O-Chain Fast Recovery STP RSTP | |
| LED Indicators | ||
| Power Indicator | Green : Power LED x 3 | |
| Ring Master Indicator (R.M.) | Green : Indicates that the system is operating in O-Ring Master mode | |
| O-Ring Indicator (Ring) | Green : Indicates that the system is operating in O-Ring mode | |
| Fault Indicator (Fault) | Amber : Indicates unexpected events occurred | |
| 10/100Base-T(X) RJ45 Port Indicator | Green for port Link/Act. Amber for Link | |
| 100 Base-FX Fiber Port Indicator | Green for port Link/Act. Amber for Link | |
| Fault Contact | ||
| Relay | Relay output to carry capacity of 1A at 24VDC | |
| Power | ||
| Redundant Input Power | Triple DC inputs: 12 ~ 48 VDC on 7-pin terminal block, 12 ~ 45 VDC on power jack | |
| Power Consumption (Typ.) | 7 Watts | 7 Watts |
| Overload Current Protection | Present | |
| Reverse Polarity Protection | Present on terminal block | |
| Physical Characteristics | ||
| Enclosure | IP-30 | |
| Dimensions (W x D x H) | 54.2(W) x 106.1(D) x 145.4(H) mm (2.13x4.18x5.72 inch.) | |
| Weight (g) | 670 g | 670 g |
| Environmental | ||
| Storage Temperature | -40 to 85°C (-40 to 185°F) | |
| Operating Temperature | -40 to 70°C (-40 to 158°F) | |
| Operating Humidity | 5% to 95% Non-condensing | |
| Regulatory Approvals | ||
| EMI | FCC Part 15, CISPR (EN55022) class A | |
| EMS | IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11 | |
| Shock | IEC60068-2-27 | |
| Free Fall | IEC60068-2-32 | |
| Vibration | IEC60068-2-6 | |
| Safety | EN60950-1 | |
| MTBF (Hours) (MIL-HDBK-217F2, GB, GC, 25°C ) | 383,478 | 383,478 |