6-port slim unmanaged Gigabit PoE Ethernet switch. 4x10/100/1000 Base-T(X) P.S.E., 1x10/100/1000Base-T(X), 1x1000Base-X, SFP

  • 4x10/100/1000Base-T(X) PoE (P.S.E.) ports
  • Supports P.S.E. based on IEEE 802.3at standard up to 30 Watts per port
  • SFP port supports 100Base-FX and 1000Base-X speed
  • Supports auto-negotiation and auto-MDI/MDI-X
  • Supports Jumbo Frame up to 10K Bytes
  • Rigid IP-30 housing design
  • DIN-Rail and wall mounting enabled
Product Specification
Physical Ports
10/100/1000Base-T(X) Ports in RJ45 with P.S.E. Auto MDI/MDIX4
10/100/1000Base-T(X) Ports in RJ45 Auto MDI/MDIX1
100/1000Base-X SFP port1
Ethernet Standards  IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX
IEEE 802.3ab for 1000Base-T
IEEE 802.3z for 1000Base-X
IEEE 802.3x for Flow control
IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
MAC Table1K MAC addressessses
LED Indicators
Power indicatorGreen : Power LED x 2
Fault IndicatorAmber : Indicate PWR1 or PWR2 failure
10/100/1000Base-T(X) RJ45 port indicator and PoE indicator (P1 ~ P4)Green for port Link/Act.
Green for PoE power injected
10/100/1000Base-T(X) RJ45 port indicator (P5)Green for port Link/Act.
Amber for 100Mbps indicator
100/1000Base-X SFP port indicator (P6)Green for port Link/Act.
SFP Speed DIP-Switch
DIP-Switch 1/2DIP-Switch 1 (ON) and DIP-Switch 2 (ON) : SFP speed setting to 100Mbps
DIP-Switch 1 (OFF) and DIP-Switch 2 (OFF) : SFP speed setting to 1000Mbps
Relay Output DIP-Switch
DIP-Switch 1Power-1 failed warning : (ON) enable, (OFF) disable
DIP-Switch 2Power-2 failed warning : (ON) enable, (OFF) disable
Fault contact
RelayRelay output to carry capacity of 1A at 24VDC
Redundant Input PowerDual DC inputs. 50~57VDC on 6-pin terminal block.
Power consumption (Typ.)6.2 Watts (power device not included)
PoE Power budget120Watts
Overload current protectionPresent
Reverse polarity protectionPresent
Physical Characteristics
Dimensions (W x D x H)26.1 (W) x 94.9 (D) x 144.3(H) mm (1.03 x 3.74 x 5.68 inches)
Weight (g)458 g
Storage Temperature-40 to 85°C (-40 to 185°F)
Operating Temperature-40 to 75°C (-40 to 167°F)
Operating Humidity5% to 95% Non-condensing
Regulatory Approvals
EMIFCC Part 15, CISPR (EN55032) class A
EMSIEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11
Free FallIEC60068-2-32