Layer 3 20-port managed Gigabit Ethernet switch. 8x10/100/1000 Base-T(X) ports, 8x10/100/1000 Base-T(X) P.S.E. ports,  4x1G/10GBase-X ports, SFP+

Anewtech Systems Industrial Ethernet Switch managed Switch O-IGPS-RX884GTP
  • Support 8-ports IEEE 802.3af/at compliant PoE and total power budget is 100W with maximum 30W per port
  • Support routing protocols – Static routing, RIP v1/v2, OSPF, PIM-SM, PIM-DM, VRRP
  • IEEE 802.1AS for timing & Synchronization
  • Support O-Ring(recovery time < 30ms) and MSTP(RSTP/STP compatible) for Ethernet Redundancy
  • O-Chain allow multiple redundant network rings
  • Provided HTTPS/SSH protocol to enhance network security
  • Support SNTP client
  • Support application-based QoS management
  • Support DOS/DDOS auto prevention
Product Specification
Physical Ports
10/100/1000Base-T(X) Ports in RJ45 Auto MDI/MDIX8
10/100/1000Base-T(X) P.S.E Ports in RJ45 Auto MDI/MDIX8
1G/2.5G/10GBase-X with SFP+ port4
Ethernet StandardsIEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3ab for 1000Base-T
IEEE 802.3z for 1000Base-X
IEEE 802.3ae for 10Gigabit Ethernet
IEEE 802.3x for Flow control
IEEE 802.3ad for LACP (Link Aggregation Control Protocol)
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
IEEE 802.1AS for Timing and Synchronization
IEEE 802.1Qat for Stream Reservation
IEEE 802.1Qav for Forwarding and Queuing Enhancements for Time-Sensitive Streams
IEEE 802.3af/at PoE specification
MAC Table16k
Priority Queues8
Packet Buffer2MB
Flash Memory512Mbits
DRAM Size8Gbits
Jumbo frameUp to 12K Bytes
Switch PropertiesSwitching latency: 7 us
Switching bandwidth: 112Gbps
Throughput (packet per second): 83.32Mpps@64Bytes packet
Max. Number of Available VLANs: 4095
VLAN ID Range : VID 1 to 4094
IGMP multicast groups: 128 for each VLAN
Port rate limiting: User Define
Security FeaturesEnable/disable ports, MAC based port security
Port based network access control (802.1x)
MAC-based authentication(802.1x)
VLAN (802.1Q ) to segregate and secure network traffic
Radius centralized password management
SNMPv3 encrypted authentication and access security
Web and CLI authentication and authorization
IP source guard
Https / SSH enhance network security
Software FeaturesSTP/RSTP/MSTP (IEEE 802.1D/w/s)
Redundant Ring (O-Ring) with recovery time less than 30ms
TOS/Diffserv supported
Quality of Service (802.1p) for real-time traffic
VLAN (802.1Q) with VLAN tagging
IGMP Snooping
Application-based QoS management
DOS/DDOS auto prevention
Port configuration, status, statistics, monitoring, security
Port mirroring
DHCP Server/Client/Relay
SNTP Client
Network RedundancyO-Ring
Routing Protocols Unicast Routing
- Static routing, RIP v1/v2, OSPF
Multicast Routing
Routing Redundancy
PoE managementPoE configuration
PoE Status
PoE Scheduling(turn on/off the PoE device)
Auto-Ping check(Reboot PDs if there is no responses)
RS-232 Serial Console PortRS-232 in DB9 connector with console cable.  115200bps, 8, N, 1
LED Indicators
Power Indicator (PWR)Green : Power LED x 3
Ring Master Indicator (R.M.)Green : Indicates that the system is operating in O-Ring Master mode
O-Ring Indicator (Ring)Green : Indicates that the system operating in O-Ring mode
Green Blinking : Indicates that the Ring is broken
Fault Indicator (Fault)Amber : Indicate unexpected event occurred
10/100/1000Base-T(X) RJ45 Port
Upper  for Link/Act indicator, Green for Link/Act indicator
Lower for speed indicator,Green for 1000Mbps, Amber for 100Mbps, Off-light for 10Mbps
10/100/1000Base-T(X) RJ45 P.S.E Port IndicatorUpper  for Link/Act indicator, Green for Link/Act indicator
Lower for PoE indicator, Green for PoE enable
1G/2.5G/10GBase-X SFP+ Port IndicatorGreen for port Link/Act.
Fault contact
RelayRelay output to carry capacity of 1A at 24VDC
Redundant Input PowerDual DC inputs 50~57VDC on 6-pin terminal block
Power consumption (Typ.)20W(without PoE)
Total PoE power budget100W@75oc/180W@60oC
Overload current protectionPresent
Reverse polarity protectionPresent
Physical Characteristics
Dimensions (W x D x H)116 x 170 x 180 mm 
Weight (g)2800 g
Storage Temperature-40 to 85oC (-40 to 185oF)
Operating Temperature-40 to 75o
Operating Humidity5% to 95% Non-condensing
Regulatory Approvals
EMCCE EMC (EN 55024, EN 55032), FCC Part 15 B
EMIEN 55032, CISPR32, EN 61000-3-2, EN 61000-3-3, FCC Part 15 B class A
EMSIEC/EN 61000-4-2 (ESD)
IEC/EN 61000-4-3 (RS)
IEC/EN 61000-4-4(EFT )
IEC/EN 61000-4-5 (Surge)
IEC/EN 61000-4-6 (CS)
IEC/EN 61000-4-8(PFMF)
Free FallIEC60068-2-31