O-IPS-2042TX/2042FX

Industrial 6-port lite-managed PoE Ethernet switch with 4x10/100Base-T(X) P.S.E. and 2x10/100Base-T(X) ports

Anewtech-Systems-Industrial-Ethernet-Switch-O-IPS-2042TX-2042FX
  • IPS-2042TX provides 4x10/100Base-T(X) P.S.E. and 2x10/100Base-T(X) ports
  • IPS-2042FX series provide 4x10/100Base-T(X) P.S.E. and 2x100Base-FX single/multi mode fiber ports
  • Fastest Redundant Ethernet Ring: O-Ring (Recovery time < 10ms over 250 units of connection)
  • Open-Ring supports the other vendor’s ring technology in open architecture
  • O-Chain support the multiple redundant ring technology
  • Provides Fast recovery technology for Ethernet multi-redundancy
  • STP/RSTP supported
  • SNMP v1/v2c/v3 support for secured network management
Datasheet
O-IPS-2042TX-2042FX.pdf
Product Specification
ModelIPS-2042TXIPS-2042FX-MM-SCIPS-2042FX-SS-SC
Physical Ports
10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX with P.S.E.444
10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX without P.S.E.2--
Fiber Ports Number-22
Fiber Ports Standard-100Base-FX100Base-FX
Fiber Mode-Multi-modeSingle-mode
Fiber Diameter (μm)-62.5/125 μm
50/125 μm		9/125 μm
Fiber Optical Connector-SCSC
Fiber Ports Specifications Typical Distance (km)-2 km30 km
Wavelength (nm)-1310 nm1310 nm
Max. Output Optical Power (dBm)--14 dBm-8 dBm
Min. Output Optical Power (dBm)--23.5 dBm-15 dBm
Max. Input Optical Power(Saturation)-0 dBm0 dBm
Min. Input Optical Power (Sensitivity)--31 dBm-34 dBm
Link Budget (dB)-7.5 dB19 dB
Technology
Ethernet StandardsIEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3x for Flow control
IEEE 802.1D for STP (Spanning Tree Protocol)
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
IEEE 802.3af PoE specification (up to 25 Watts per port for P.S.E.)
MAC Table1024 MAC addresses
Priority Queues4
ProcessingStore-and-Forward
Switch PropertiesSwitching bandwidth : 1.2Gbps
VLAN : Port Based
Security FeaturesEnable/disable ports
VLAN to segregate and secure network traffic
Software FeaturesSTP/RSTP (IEEE 802.1D/w)
Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units
Open-Ring support the other vendor’s ring technology in open architecture
Port configuration, status, statistics, monitoring, security
DHCP Client
Network RedundancyO-Ring
Open-Ring
O-Chain
Fast recovery
STP
RSTP
LED Indicators
Power /PoE IndicatorGreen : Power LED x 3, Green : PoE LED x 4
R.M. IndicatorGreen : Indicates that the system is operating in O-Ring Master mode
Fault IndicatorAmber : Indicates unexpected event occurred
O-Ring IndicatorGreen : Indicates that the system is operating in O-Ring mode
10/100Base-T(X) RJ45 Port IndicatorGreen for port Link/Act. Amber for Link
Fiber Port IndicatorGreen for port Link/Act. Amber for Link
Power
Redundant Input PowerTriple DC inputs. 2x48VDC on 7-pin terminal block , 1x48VDC on power jack
Power Consumption (Typ.)5 Watts7 Watts7 Watts
Overload Current ProtectionPresent
Reverse Polarity ProtectionPresent on terminal block
Physical Characteristics
EnclosureIP-30
Dimensions (W x D x H)52(W)x106.1(D)x144.3(H) mm (2.05x4.18x5.68 inch.)
Weight (g)696 g709 g709 g
Environmental
Storage Temperature-40 to 85°C (-40 to 185°F)
Operating Temperature-40 to 70°C (-40 to 158°F)
Operating Humidity5% to 95% Non-condensing
Regulatory Approvals
EMIFCC Part 15, CISPR (EN55022) class A
EMSIEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11
ShockIEC60068-2-27
Free FallIEC60068-2-32
VibrationIEC60068-2-6
SafetyEN60950-1
MTBF (Hours) (MIL-HDBK-217F2, GB, GC, 25°C )304,333292,673292,673