O-IPS-3082GC-AT

Industrial 10-port managed PoE Ethernet switch with 8x10/100Base-T(X) P.S.E. and 2xGigabit combo ports, SFP socket

Anewtech-industrial-ethernet-switch-O-IPS-3082GC-AT

Features

  • World’s fastest Redundant Ethernet Ring: O-Ring (recovery time < 10ms over 250 units of connection)
  • Open-Ring support the other vendor’s ring technology in open architecture
  • O-Chain allow multiple redundant network rings
  • Support standard IEC 62439-2 MRP (Media Redundancy Protocol) function (This function is available by request only)
  • STP/RSTP:2004/MSTP supported
  • 8 ports P.S.E. fully compliant with IEEE802.3at standard, provide up to 30 Watts per port
  • Provide PoE power on delay function, users can define delay time for PoE power supply
  • Support IPV6 new internet protocol version
  • Provided HTTPS/SSH protocol to enhance network security
  • Support TACACS+ and 802.1x User Authentication for security

Specification

Physical Ports
10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX with P.S.E. 8
Gigabit Combo Ports with 10/100/1000Base-T(X) and 100/1000Base-X SFP port 2
Technology
Ethernet Standards   IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3z for 1000Base-X
IEEE 802.3ab for 1000Base-T
IEEE 802.3x for Flow control
IEEE 802.3ad for LACP (Link Aggregation Control Protocol )
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1D for STP (Spanning Tree Protocol)
IEEE 802.1D-2004 for RSTP:2004 (Rapid Spanning Tree Protocol 2004)
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
MAC Table 8192 MAC addressessses
Priority Queues 4
Processing Store-and-Forward
Switch Properties Switching latency: 7 μs
Switching bandwidth: 5.6Gbps
Max. Number of Available VLANs: 4096
IGMP multicast groups: 1024
Port rate limiting: User Define
Security Features Enable/disable ports, MAC based port security
Port based network access control (802.1x)
VLAN (802.1Q ) to segregate and secure network traffic
Supports Q-in-Q VLAN for performance & security to expand the VLAN space
Radius centralized password management
SNMP v1/v2c/v3 encrypted authentication and access security
Https / SSH enhance network security
Software Features STP/RSTP:2004/MSTP (IEEE 802.1D/w/s)
Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units
TOS/Diffserv supported
Quality of Service (802.1p) for real-time traffic
VLAN (802.1Q) with VLAN tagging and GVRP supported
IGMP Snooping for multicast filtering
Port configuration, status, statistics, monitoring, security
SNTP for synchronizing of clocks over network
Support PTP Client (Precision Time Protocol) clock synchronization
DHCP Server / Client support
Port Trunk support
MVR (Multicast VLAN Registration) support
Modbus TCP
Network Redundancy   O-Ring
O-Chain 
Open-Ring
STP
RSTP:2004
MSTP
MRP (This function is available by request only)
Warning / Monitoring System Relay output for fault event alarming
Syslog server / client to record and view events
Include SMTP for event warning notification via email
Event selection support
DDM Function Voltage / Current / Temperature
RS-232 Serial Console Port RS-232 in RJ45 connector with console cable. 9600bps, 8, N, 1
LED Indicators
Power /PoE Indicator Green : Power LED x 3, Green : PoE LED x 8
R.M. Indicator Green : Indicates that the system is operating in O-Ring mode
Fault Indicator Amber : Indicates unexpected event occurred
10/100Base-T(X) RJ45 Port Indicator Green for port Link/Act. Amber for Duplex/Collision
10/100/1000Base-T(X) RJ45 Port Indicator Green for port Link/Act. Amber for 100Mbps indicator
100/1000Base-X / Fiber Port Indicator Green for port Link/Act.
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC
Power
Redundant Input Power Dual DC inputs. 50 ~ 57VDC on 6-pin terminal block
Power Consumption (Typ.) 7.68 Watts (Power consumption of P.S.E. not included)
Overload Current Protection Present
Reverse Polarity Protection NOT Present
Physical Characteristics
Enclosure IP-30
Dimensions (W x D x H) 74.3(W)x109.2(D)x153.6(H) mm ( 2.93 x 4.3 x 6.05 inch.)
Weight (g) 1185g
Environmental
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature -40 to 70°C (-40 to 158°F)
Operating Humidity 5% to 95% Non-condensing
Regulatory Approvals
EMI FCC Part 15, CISPR (EN55022) class A,
EMS IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1