Industrial card type Ethernet to fiber media converter. 1x100/1000 Base-T(X) to 1x100/1000 Base-X, SFP

Anewtech Systems Industrial Media Converter Oring Ethernet to fiber media converter O-RGMC-111GPB
  • Supports 1 port 100/1000Base-T(X) auto-negotiation and auto-MDI/MDI-X
  • Support Ethernet to SFP port signal conversion
  • Ethernet port supports full/half duplex operation
  • SFP port support full-duplex operation
  • Supports store and forward transmission
  • Provided DIP-Switch to setting SFP speed
  • Hot-swappable, High reliability and easy installation
  • Up to 18 slot high density installation in RMC-1000 chassis on 19 inches rack
Product Specification
Physical Ports
100/1000Base-T(X) Ports in RJ45 Auto MDI/MDIX1
100/1000Base-X SFP Port1
Ethernet StandardsIEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3z for 1000Base-X
IEEE 802.3ab for 1000Base-T
DIP-SwitchDIP-Switch 1 (ON) and 2 (ON) : SFP speed setting to 100Mbps
DIP-Switch 1 (OFF) and 2 (OFF) : SFP speed setting to 1000Mbps
LED Indicators
Power IndicatorGreen : Power LED x 1
100/1000Base-T(X) RJ45 port IndicatorLED for Link/Act and Speed indicator ~
Green on only : 1000Mbps Link/Act - (ON) Link up / (Flash) Acting / (OFF) Link down
Green and Amber on : 100Mbps Link/Act - (ON) Link up / (Flash) Acting / (OFF) Link down
*Note : If amber on only : 10Mbps (This is not avail mode)
100/1000Base-X SFP port IndicatorGreen for fiber port Link/Act - (ON) Link up / (Flash) Acting / (OFF) Link down
Power Consumption (Typ.)3.6 Watts
Overload Current ProtectionPresent
Physical Characteristics
Dimensions (W x D x H)21.8(W) x 66.5(D) x 126(H) mm
Weight (g)125g
Storage Temperature-40 to 85°C (-40 to 185°F)
Operating Temperature-10 to 60°C (14 to 140°F)
Operating Humidity5% to 95% Non-condensing
Regulatory Approvals
EMIFCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2, EN55011, EN50121-4)
EMSIEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11
Free FallIEC60068-2-32