AS-2014TP-HTR
4 hot-pluggable nodes in 2U Server. 3 Hot-swap 3.5" SATA3 drive bay
Four hot-pluggable systems (nodes) in a 2U form factor. Each node supports the following:
- Dual AMD EPYC™ 7003/7002 Series Processors (7003 Series Processor drop-in support requires BIOS version 2.0 or newer)
- Up to 2TB ECC 3DS LRDIMM, up to DDR4-3200MHz; 8 DIMM slots
- 2 PCI-E 4.0 x16 (LP) slots
- Flexible Networking support via SIOM; Dedicated IPMI 2.0 LAN
- Software Out of Band License key (SFT-OOB-LIC) included for OOB BIOS management
- 3 Hot-swap 3.5" SATA3 drive bays
- M.2 Interface: 4 SATA/PCI-E 4.0 x4
- M.2 Form Factor: 2280, 22110, 2260, 2242
- M.2 Key: M-key
- 2000W Redundant Power Supplies Titanium Level (96%) (Full redundancy based on configuration and application load)
AS -2014TP-HTR | A+ Server 2014TP-HTR |
Motherboard (per Node) | Super H12SST-PS |
Processor/Chipset (per Node) | |
CPU | Single AMD EPYC™ 7003/7002 Series Processor (The latest AMD EPYC™ 7003 Series Processor with AMD 3D V-Cache™ Technology requires BIOS version 2.3 or newer) Socket SP3 Supports CPU TDP / cTDP up to 280W* |
Cores | Up to 64 Cores |
Note | * Certain CPUs with high TDP may be supported only under specific conditions |
System Memory (per Node) | |
Memory Capacity | 8 DIMM slots Supports up to 2TB Registered ECC DDR4 3200MHz SDRAM in 8 DIMMs 8-channel memory bus |
Memory Type | DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs |
Memory Sizes | 8GB, 16GB, 32GB, 64GB, 128GB, 256GB |
Memory Voltage | 1.2V |
Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) |
On-Board Devices (per Node) | |
Chipset | System on Chip |
Storage | SATA3 (6Gbps) via AMD EPYC |
Network Controllers | Barebones and Complete System must have at least one SIOM or network card installed per node |
IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support |
Video | ASPEED AST2500 BMC |
Input / Output (per Node) | |
LAN | Provided via SIOM (optional) 1 RJ45 Dedicated IPMI LAN port |
USB | 2 USB 3.0 ports (rear) 1 USB 2.0 port (Type A) |
Video | 1 VGA port |
DOM | 1 Super DOM (Disk on Module) port |
Others | 2 COM ports (header) 1 TPM 2.0 header |
System BIOS (per Node) | |
BIOS Type | AMI 128Mb SPI Flash ROM |
Management (per Node) | |
Software | IPMI 2.0, KVM with dedicated LAN, SSM , SUM , SuperDoctor® 5 , Watch Dog |
Power Configurations | ACPI / APM Power Management |
Chassis | |
Form Factor | 2U Rackmount |
Model | CSE-827HQ+-R2K04BP |
Dimensions and Weight | |
Width | 17.25" (438mm) |
Height | 3.47" (88mm) |
Depth | 30.5" (774mm) |
Package | 26.4" (W) x 11.2" (H) x 39.8" (D) |
Weight | Gross Weight: 85 lbs (38.6 kg) Net Weight: 54.5 lbs (24.7 kg) |
Available Colors | Black |
Front Panel (per Node) | |
Buttons | Power On/Off button UID button |
LEDs | Power status LED HDD activity LED Network activity LEDs Universal Information (UID) LED |
Expansion Slots (per Node) | |
PCI-Express | 2x PCI-E 4.0 (x16) Low-profile slots 1x SIOM card support (must bundle with network card) |
M.2 | Interface: 4 SATA/PCI-E 4.0 x4 Form Factor: 2280, 22110, 2260, 2242 Key: M-key |
Drive Bays (per Node) | |
Hot-swap | 3 Hot-swap 3.5" SATA3 drive bays |
System Cooling | |
Fans | 4 Heavy duty 8cm PWM fans |
Power Supply (76mm Width) | 2000W Redundant Power Supplies with PMBus |
Total Output Power | 1000W/1800W/1980W/2000W |
Dimension (W x H x L) | 76 x 40 x 336 mm |
Input | 1000W: 100-127 Vac / 12-9.5 A / 50-60 Hz 1800W: 200-220 Vac / 10-9.5 A / 50-60 Hz 1980W: 220-230 Vac / 10-9.8 A / 50-60 Hz 2000W: 230-240 Vac / 10-9.8 A / 50-60 Hz 2000W: 200-240 Vac / 11.8-9.8 A / 50-60 Hz (UL/cUL only) |
+12V | Max: 83.3A / Min: 0A (100-127 Vac) Max: 150A / Min: 0A (200-220 Vac) Max: 165A / Min: 0A (220-230 Vac) Max: 166.7A / Min: 0A (230-240 Vac) Max: 166.7A / Min: 0A (200-240 Vac) (UL/cUL only) |
+5Vsb | Max: 1A / Min: 0A |
Output Type | 27 Pairs Gold Finger Connector |
Certification | Titanium Level |
Operating Environment | |
RoHS | RoHS Compliant |
Environmental Spec. | Operating Temperature: 10°C ~ 30°C Non-operating Temperature: -40°C to 60°C Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing) |
Twin Systems: Leading Multi-node Architectures
BigTwin is the 5th generation in the Supermicro® Twin Family with a multitude of innovations and engineering breakthroughs. TwinPro systems are designed for simplified deployment and maintenance, and assembled with the highest quality to ensure continuous operation even at maximum capacity.
With AMD EPYC™ 7003 Series Processors with AMD 3D V-Cache™ Technology, customers in high-end enterprise, data center, HPC and Cloud Computing environments receive the greatest competitive advantage from data center resources with the Supermicro® TwinPro.
NO-COMPROMISE 2U 4-NODE ARCHITECTURE
- Highly configurable 2U 4-node systems
- 2-socket with 16 DIMMs or 1-socket with 8 DIMMs per node
- Flexible storage and I/O options including NVMe/SATA3 and SIOM networking
- Applications: HCI , HPC , CDN , 5G UPF , Technical Computing (EDA, CFD, FEA) , Cloud Computing
2U System with 4 hot-pluggable
Dual-Processor Server Nodes with U.2 NVMe
2U System with 4 hot-pluggable
Dual-Processor Server Nodes with SATA
2U System with 4 hot-pluggable
Single-Processor Server Nodes