O-TGPS-9084GT-M12X-BP2-MV

EN50155 12-port managed Gigabit PoE Ethernet switch. 8x10/100/1000 Base-T(X) P.S.E., 4x10/100/1000 Base-T(X), 2xbypass, 110VDC

Anewtech Systems Industrial Ethernet Switch EN50155 managed Switch O-TGPS-9084GT-M12X-BP2-MV
  • Leading EN50155-compliant Ethernet switch for rolling stock application
  • Support O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) for Ethernet Redundancy
  • O-Chain allow multiple redundant network rings
  • Supports standard IEC 62439-2 MRP*NOTE (Media Redundancy Protocol) function
  • Supports IEEE 802.3af/at compliant PoE with maximum 15.4/30Watts per port
  • Supports PoE scheduled configuration and PoE auto-ping check function
  • Supports IEEE 1588v2 clock synchronization
  • Supports IPV6 new internet protocol version
  • Supports Modbus TCP protocol
  • Supports IEEE 802.3az Energy-Efficient Ethernet technology
Product Specification
ModelTGPS-9084GT-M12X-BP2-MV
Physical Ports
10/100/1000Base-T(X) with P.S.E. Ports in M12 Auto MDI/MDIX8 (8-pin female X-coding)
10/100/1000Base-T(X) Ports in M12 Auto MDI/MDIX4 (8-pin female X-coding with 2xbypass function included)
Technology
Ethernet StandardsIEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX
IEEE 802.3ab for 1000Base-T
IEEE 802.3x for Flow control
IEEE 802.3ad for LACP (Link Aggregation Control Protocol)
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
IEEE 802.3af PoE specification (up to 15.4 Watts per port for P.S.E.) 
MAC Table8K
Packet Buffer Size4Mbits
Priority Queues8
ProcessingStore-and-Forward
Switch PropertiesSwitching latency: <4.9 µs
Switching bandwidth: 24Gbps
Throughput (packet per second): 17.856Mpps@64Bytes packet
Max. Number of Available VLANs: 4095
IGMP multicast groups: 128 for each VLAN
Port rate limiting: User Define
Jumbo frameUp to 9.6K Bytes
Security FeaturesDevice Binding security feature
Enable/disable ports, MAC-based port security
Port-based network access control (802.1x)
VLAN (802.1Q ) to segregate and secure network traffic
Radius centralized password management
SNMPv3 encrypted authentication and access security
Https / SSH enhance network security
Software FeaturesSTP/RSTP/MSTP (IEEE 802.1D/w/s)
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units
TOS/Diffserv supported
Quality of Service (802.1p) for real-time traffic
VLAN (802.1Q) with VLAN tagging and GVRP supported
IGMP Snooping
IP-based bandwidth management
Application-based QoS management
DOS/DDOS auto prevention
Port configuration, status, statistics, monitoring, security
DHCP Server/Client/Relay
SMTP Client
Modbus TCP
Network RedundancyO-Ring
O-Chain
MRP*NOTE
MSTP (RSTP/STP compatible)
RS-232 Serial Console PortRS-232 in M12 connector (female A-coding)
Baud rate setting: 115200bps, 8, N, 1
LED Indicators
Power Indicator (Power)Green: Power LED x 1
RingMaster Indicator (R.M.)Green: Indicates that the system is operating in O-Ring Master mode
O-Ring Indicator (Ring)Green: Indicates that the system operating in O-Ring mode
Green Blinking: Indicates that the Ring is broken.
Fault Indicator (Fault)Red: Indicate unexpected event occurred
10/100/1000Base-T(X) M12 P.S.E. Port IndicatorTop Green LED for Link/Act indicator: Green for link-up, Off for link-down, Blinking for Act.
Middle Green LED for PoE enabled indicator: Green for PoE enabled, Off for PoE disable.
Bottom dual-color LED for Ethernet speed indicator: Green for 1000Mbps, Amber for 100Mbps, Off for 10Mbps
10/100/1000Base-T(X) M12 Port IndicatorTop Green LED for Link/Act indicator: Green for link-up, Off for link-down, Blinking for Act.
Bottom dual-color LED for Ethernet speed indicator: Green for 1000Mbps, Amber for 100Mbps, Off for 10Mbps
Fault Contact
RelayRelay output to carry capacity of 3A at 24VDC on M12 connector (5-pin A-coding, female connector)
Reset Function
Reset Button< 5 sec: System reboot, > 5 sec: Factory default
Power
Input Power72/110 (50.4~137.5) VDC on 4-pin male S-coding connector
Power Consumption (Typ.)≤8Watts, 72VDC/0.35A (7.56W), 96VDC/0.28A (7.56W), 110VDC/0.25A (7.56W) - (power consumption of P.S.E. is not included)
Total PoE Output Power 95 Watts
Overload Current ProtectionPresent
Reverse Polarity ProtectionPresent
Physical Characteristics
EnclosureIP-30
Dimensions (W x D x H)260 (W) x 89.6 (D) x 216 (H) mm
10.24 (W) x 3.53 (D) x 8.5 (H) inch
Weight (g)2535g
Environmental
Storage Temperature-40 to 85oC (-40 to 185oF)
Operating Temperature-40 to 75oC (-40 to 167oF)
Operating Humidity5% to 95% Non-condensing
Regulatory Approvals
EMCCE EMC (EN 55024, EN 55032), FCC Part 15 B, EN 50155(EN 50121-1, EN 50121-3-2)
EMIEN 55032, CISPR32, EN 61000-3-2, EN 61000-3-3, FCC Part 15 B class A
EMSEN 55024 (IEC/EN 61000-4-2 (ESD: Contact 4KV), IEC/EN 61000-4-3 (RS 80MHz to 1GHz: 3V/m 1kHz 80% AM), IEC/EN 61000-4-4 (EFT Power 0.5KV, Signal 0.5KV), IEC/EN 61000-4-5 (Surge: Power 0.5KV, RJ45 1KV), IEC/EN 61000-4-6 (CS 150K-80MHz: 3Vrms 1kHz 80% AM), IEC/EN 61000-4-8(PFMF), IEC/EN 61000-4-11 (DIP)
ShockIEC60068-2-27
Free FallIEC60068-2-31
VibrationIEC60068-2-6
SafetyEN 60950-1 (LVD)
OtherEN 50155 (IEC 61373)
MTBF202,630 hrs.